Toll Free: 800-854-0021
FAX: 715-839-8145
email: sales@ldpi-inc.com

300 - Slim Fluorescent Lighting Specifications

300 Slim Light Series Fluorescent Lighting Dimensions

Note: Light Fixture's glass
frame extends 3/8" into
booth when mounted in
booth panel.

SERIES	WATTS	LAMP QTY	HUB	ORDER #	VOLTAGE
390320 (2 lamp)	25W T8	2	1/2" NPT	390320 3613	120-277 Volts 50/60 Hz
		2	1/2" NPT	390320347 3276	347 Volts 60 Hz

390340 (4 lamp)	25W T8	4	1/2" NPT	390340 3546	120-277 Volts 50/60 Hz
		4	1/2" NPT	390340347 3125	347 Volts 60 Hz

390360 (6 lamp)	25W T8	6	1/2" NPT	390360 3546	120-277 Volts 50/60 Hz
		6	1/2" NPT	390360347 3125	347 Volts 60 Hz

Type	Model	"A"	"B"	"C"	"D"
Three Ft. Two Lamp Inside Access	390320	9-1/2"	13"	38"	39-7/8"
Three Ft. Four Lamp Inside Access	390340	14-1/2"	18"	38"	39-7/8"
Three Ft. Six Lamp Inside Access	390360	19-1/2"	23"	38"	39-7/8"

300 Slim Light Series Fluorescent Lighting Hole Detail

Hole Detail Dimensions
TYPE	"E"	"F"
2 Lamp Fixture	10-3/4"	7"
4 Lamp Fixture	15-3/4"	12"
6 Lamp Fixture	20-3/4"	17"

OPTIONS

Options	Part Number
10ft Wire Lead Assy	3405
8ft Wire Lead Assy	3646

IMPORTANT: Normally open magnetic switches are intended to be used to trigger a relay which disables the paint system. Because of the small capacity of the switch, a solid state relay is recommended. It may be desired by others to utilize a seperate power supply to segregate the relay from lighting power supply. The magnetic switch is reated for 10 watts (resistive) at a maximum of 300 VAC. The magnetic switch is NOT designed to directly control light operations.

CAUTION: Overloading the switch circuits will cause failure. LDPI^® recommends having a certified electrician/engineer review circuit loads to insure that overloading of switch does not occur.

Back

SPECS