UNIT 80
EAU CLAIRE, WI 54703
Toll Free: 800-854-0021
FAX: 715-839-8145
email: sales@ldpi-inc.com
Model 390260 - Hazardous Location Fluorescent
Light Fixture Specifications
 |
Note: Light Fixture's glass frame extends 3/8" into booth when mounted in booth panel. |
| SERIES | WATTS | LAMP QTY | HUB | ORDER # | VOLTAGE |
|---|---|---|---|---|---|
| 390260 Front & Rear Access |
32W T8 | 4 |
1/2" NPT | 390260 3546 | 120-277 Volts 50/60HZ |
4 |
1/2" NPT | 390260347 3125 | 347 Volts 60HZ | ||
| 32W T8HLO | 4 |
1/2" NPT | 390260120 1744 | 120 Volts 60HZ | |
| 1/2" NPT | 390260277 1766 | 277 Volts 60HZ | |||
| 40W T12 | 1/2" NPT | 390260120 1748 | 120 Volts 60HZ | ||
4 |
1/2" NPT | 390260277 1712 | 277 Volts 60HZ | ||
4 |
1/2" NPT | 390260347 3278 | 347 Volts 60HZ | ||
| 60W T12HO | 4 |
1/2" NPT | 390260120 3260 | 120 Volts 60HZ | |
4 |
1/2" NPT | 390260277 3222 | 277 Volts 60HZ | ||
| 390261 Rear Access Only |
32W T8 | 4 |
1/2" NPT | 390261 3546 | 120-277 Volts 50/60HZ |
4 |
1/2" NPT | 390261347 3125 | 347 Volts 60HZ | ||
| 32W T8HLO | 4 |
1/2" NPT | 390261120 1744 | 120 Volts 60HZ | |
4 |
1/2" NPT | 390261277 1766 | 277 Volts 60HZ | ||
| 40W T12 | 4 |
1/2" NPT | 390261120 1748 | 120 Volts 60HZ | |
4 |
1/2" NPT | 390261277 1712 | 277 Volts 60HZ | ||
4 |
1/2" NPT | 390261347 3278 | 347 Volts 60HZ | ||
| 60W T12HO | 4 |
1/2" NPT | 390261120 3260 | 120 Volts 60HZ | |
4 |
1/2" NPT | 390261277 3222 | 277 Volts 60HZ | ||
Lamps Sold Seperately.
|
||
| Optional: Panel Stiffener Fits 18 Ga. Panels (Kit #1704)  |
 |
|
IMPORTANT:
Normally open magnetic switches are intended to be used to trigger a relay which disables the paint system. Because of the small capacity of the switch, a solid state relay is recommended. It may be desired by others to utilize a seperate power supply to segregate the relay from lighting power supply. The magnetic switch is reated for 10 watts (resistive) at a maximum of 300 VAC. The magnetic switch is NOT designed to directly control light operations.
CAUTION:
Overloading the switch circuits will cause failure. LDPI® recommends having a certified electrician/engineer review circuit loads to insure that overloading of switch does not occur.
 |
Back |
[ Home | Company Information | Products | Technical Information | Contact LDPI® ] Copyright© 2008 by LDPI, Inc. All rights reserved. |